I feel like this post is worthy of a few tears being shed. And no, it has nothing to do with the actual building of this table. That actually went pretty smoothly.
But it also signified the end of our pile of 2×4’s. 🙁
When we started our renovation last spring, we went back and forth on whether or not to save all the 30 year old studs that were coming down with the walls. I, of course, want to SAVE.ALL.THE.THINGS.
My husband was leaning more towards the side of “we’re in over our heads as it is and have already paid for a dumpster in our driveway… let’s pitch them.”
But we met in the middle and the obviously bad ones got pitched, and I still got a nice pile of leftover ones to work with. And my word, is my husband glad now that we saved them!
I built a 2×4 desk that we love and that fits an awkward corner of our living room perfectly!
I built 3 blanket ladders…
he built frames for 4 set of floating shelves, the frame for our coat bench…
2 benches, he framed out 2 full walls in our basement that we’re finishing and so many other little projects or crafts! Not bad at all for FREE wood!
And now we also have this gorgeous DIY console table out of 2x4s! It was the very end of our pile, though. In fact, I even had to go buy $12 worth of new wood just to finish this one!
But I think it was worth the $12, wouldn’t you say?!
If you’re using old wood like I was, the key is to get a belt sander so you can get all the old glue and other grime off. The belt sander really speeds up your work and makes the wood look new again.
I also used a palm sander to soften all the edges a bit. I prefer mine a bit more rounded than a straight, harsh edge.
I found the plans on Rogue Engineer. If you’re ever looking for plans, I highly recommend his site. I’ve looked at many other woodworkers’ sites before, and find his the absolute easiest to use. The plans are straightforward, the cut lists are easy to follow and every single thing I’ve made from his plans has turned out! That’s always a bonus, eh?
If you look at his plans, though, you’ll see his X-frame is a bit different from ours. His calls for cross bars across both of the bottom angled pieces to make 2 large x’s. We actually cut the pieces for the first X, but when we held it up, it was just a bit busier than we wanted.
I still really like the way his looks, but we felt the simple single bar fit better with some of the other pieces we’ve built already. Just a little note, that you don’t always have to follow plans exactly! Our table is incredibly sturdy and solid without those extra pieces, and no one will ever know the difference except us!
And just look how far this room has come! This is what the room looked like when we walked through it last year before we bought it:
And I won’t give you the full reveal yet, but here’s how our new table fits in!
Now hopefully sometime soon I can get a decent picture without the solar glare coming through that window, and then you’ll be able to see the full reveal!
Grab your supplies and start building!